Step by Step Guide to Changing a Door Knob

Step by Step Guide to Changing a Door Knob

Changing a door knob may seem like a daunting task, but with the right tools and a little guidance, it can be a straightforward process. Whether you're replacing an old door knob or simply looking to update the style of your door, this step by step guide will help you along the way. Follow these instructions to successfully change a door knob in no time!

Step 1: Gather the necessary tools

Before you begin, make sure you have the following tools readily available:

• Screwdriver (Phillips or flat-head, depending on your door knob)
• New door knob set
• Tape measure
• Pencil or marker
• Optional: Power drill

Step 2: Remove the old door knob

To remove the old door knob, locate the screws on the inside of the door. Unscrew them using a screwdriver and gently pull apart the two sides of the door knob. Once you have removed both sides, you should be left with a hole in the door.

Step 3: Measure the backset

Using a tape measure, determine the backset of your door. The backset is the distance from the edge of the door to the center of the hole for the door knob. Common backsets are 2-3/8 inches or 2-3/4 inches. Measure and make a note of the correct backset for your door.

Step 4: Select the new door knob

Choose a new door knob that fits your style preferences and matches the backset measurements. Take into consideration the type of door you have (interior or exterior) and whether it needs to be locked or not. Ensure that the door knob set you choose includes all the necessary components for installation.

Step 5: Install the new door knob

Begin by inserting the latch into the edge of the door, ensuring that the beveled side faces the direction the door closes. Secure it in place using the screws provided in the new door knob set.
Next, take the outside part of the new door knob and insert it through the hole in the door. Align the screw holes, then insert and tighten the screws using a screwdriver.
Take the inside part of the new door knob and align it with the outside part. Insert and tighten the screws here as well.
Finally, test the new door knob to ensure it functions properly. Check that the latch retracts smoothly and that the door knob turns freely.

Step 6: Optional: Additional adjustments

If the new door knob is not sitting flush against the door, you may need to make some additional adjustments. Unscrew the door knob and inspect the latch and strike plate for any issues. Make any necessary changes or adjustments before reinstalling the door knob.

Step 7: Enjoy your new door knob!

Congratulations! You have successfully changed your door knob. Admire your work, knowing that you completed this task with your own hands. Enjoy the improved aesthetics and functionality that your new door knob brings to your door.

Bear in mind that the steps provided in this guide are general instructions and may vary depending on the specific door knob and door type. Always refer to the manufacturer's instructions for your particular product.