How to Install and Set Up Furrion Vision S Camera System

The Furrion Vision S Camera System is a popular choice among RV owners for its reliable and easy-to-use features. Whether you are new to using rearview camera systems or looking to upgrade your current setup, this guide will provide you with step-by-step instructions on how to install and set up the Furrion Vision S Camera System.

What You Will Need

Before you start the installation process, make sure you have the following items:

• Furrion Vision S Camera System
• RV with 12V power source
• Basic hand tools (screwdriver, drill, etc.)

Step 1: Mount the Monitor

The first step is to mount the monitor inside your RV. Choose a location that provides you with a clear view while driving, such as near the dashboard or above the windshield. Use the included mounting bracket and screws to secure the monitor firmly in place. Make sure the monitor is positioned at a comfortable height and angle for easy viewing.

Step 2: Install the Camera

Next, you need to install the camera on the rear exterior of your RV. Find a suitable spot where the camera can capture the best view. Keep in mind that the camera should be mounted high enough to avoid obstacles and the lens should not be obstructed by any objects on the RV. Use the provided screws to attach the camera securely.

Step 3: Connect the Camera to Power

Once the camera is mounted, you need to connect it to the power source. Locate the nearest 12V power source in your RV, such as the rear lights or reverse lights. Connect the camera's red power wire to the positive terminal and the black power wire to the negative terminal of the power source. Use proper wire connectors or electrical tape to secure the connections.

Step 4: Pair the Camera and Monitor

After the camera is connected to power, turn on the monitor and press the "PAIR" button on the back of the monitor. The monitor will display a pairing code. Go to the camera and locate the pairing button, which is usually located on the bottom of the camera. Press and hold the pairing button until the camera's LED starts flashing. The camera and monitor will establish a wireless connection, and the live video feed should appear on the monitor.

Step 5: Adjust the Camera and Monitor Settings

Once the camera and monitor are paired, you can customize the settings to your preference. The Furrion Vision S Camera System offers various settings, such as brightness, contrast, and image orientation. Use the menu buttons on the monitor to navigate through the settings and make adjustments accordingly. Experiment with different settings to find the optimal configuration for your needs.

Step 6: Test the System

Before hitting the road, it's essential to test the system to ensure everything is functioning correctly. With the RV parked, engage the reverse gear or activate the rear lights, depending on how you wired the camera's power source. The monitor should automatically switch to the camera's video feed, displaying the live view from the back of your RV. Pay attention to the image quality, visibility, and any potential interference. If everything looks good, you are ready to start using the Furrion Vision S Camera System!

Installing and setting up the Furrion Vision S Camera System is straightforward, even for those with limited technical skills. Follow these steps carefully, and you'll enjoy the convenience and peace of mind provided by this top-notch camera system in no time!