Step-by-Step Guide to Disassembling the Brita Pitcher

If you own a Brita pitcher and need to clean or replace its parts, disassembling it is a simple process. In this step-by-step guide, we will walk you through the disassembly process to help you maintain your pitcher's optimal performance.

Step 1: Gather the Necessary Tools

Before you start disassembling your Brita pitcher, gather the following tools:

• Flathead screwdriver
• Small bowl or container

Step 2: Remove the Filter

The first step is to remove the filter from the pitcher. Follow these steps:

1. Hold the pitcher with one hand on the handle and the other hand supporting the base.
2. Turn the pitcher upside down.
3. Locate the filter inside the pitcher near the top.
4. Twist the filter counterclockwise to unlock it.
5. Pull the filter out of the pitcher.

Set the filter aside in a safe place as we will clean it separately later.

Step 3: Remove the Lid

To remove the lid from the pitcher, follow these steps:

1. Place the pitcher on a flat surface with the spout facing up.
2. Locate the lid at the top of the pitcher.
3. Using a flathead screwdriver, carefully pry around the edge of the lid to separate it from the pitcher.
4. Lift the lid gently to remove it completely.

Place the lid aside for cleaning.

Step 4: Separate the Reservoir Cover

The next step is to separate the reservoir cover from the pitcher. Follow these steps:

1. Flip the pitcher over, so the handle is resting on a flat surface or positioned between your legs.
2. Locate the reservoir cover, which is the larger piece attached to the pitcher.
3. Hold the pitcher firmly with one hand, while using the other hand to push the cover downwards.
4. Apply steady pressure to detach the reservoir cover from the pitcher.

Place the reservoir cover aside to be cleaned separately.

Step 5: Disassemble the Handle

To disassemble the handle of the Brita pitcher, follow these steps:

1. Locate the screws on each side of the handle.
2. Use the flathead screwdriver to unscrew and remove the screws.
3. Once the screws are removed, gently lift the handle to separate it from the pitcher.

Set the handle and screws aside for cleaning.

Step 6: Clean the Parts

Now that you have disassembled all the parts, it's time to clean them:

1. Fill a small bowl or container with warm soapy water.
2. Place the filter, lid, reservoir cover, handle, and screws in the soapy water.
3. Use a sponge or cloth to clean each part thoroughly.
4. Rinse the parts with clean water and allow them to air dry.

Make sure all the parts are completely dry before reassembling the pitcher.

Step 7: Reassemble the Brita Pitcher

Now that the parts are clean and dry, it's time to reassemble the Brita pitcher:

1. Attach the handle back onto the pitcher and secure it with the screws.
2. Place the reservoir cover back onto the pitcher and press it firmly to ensure it locks in place.
3. Slide the lid onto the pitcher and make sure it is properly aligned.
4. Take the filter and insert it inside the pitcher, twisting it clockwise to lock it in place.

Your Brita pitcher is now fully reassembled and ready to be used again!

Remember to regularly clean and replace the filter as recommended by the manufacturer for optimal performance.

By following this step-by-step guide, you can easily disassemble and clean your Brita pitcher, ensuring it continues to provide clean and filtered water for you and your family.